DIY Products

Rubber Keypads
Our translucent white silicon rubber keypads have 64 buttons plus 2 function buttons on the bottom. Each button has a hole on the bottom to allow for LED illumination. The buttons have a conductive backing for creating a contact to a circuit board. The button pad can be easily separated with a razor blade (at your own risk of course) to create a different layout.

These are the same buttons we use on our Ohm64 and block controllers and do not have any printing on them

Available now at the Livid Shop

Technical documents
4x1 pad dimensions
4x1 pad contacts
8x8 pad dimensions
8x8 pad contacts
Pad contacts library for Eagle


Keypads documents by Livid is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.

If you are looking for a custom pad solution please contact us through our Livid Industry


Faders / Slide Potentiometers

These are the same slide potentiometers (faders) we use on our controllers. We have these custom made and they are very high quality dual rail sliders with a smooth resistance. Perfect for controllers or audio gear. Data sheet can be found here.

Available now at the Livid Shop


Rack Rails
These rack rails are designed to rackmount the Ohm64 or Ohm Classic. Powder coated black and made from steel, they can be mounted to the side of the Ohm controllers for easy rack mounting and removal. The rails fit any standard rack enclosure and can be attached to the side of the Ohm with standard wood screw. Requires assembly.

Specs
8.625” - length
2” - height

Available now at the Livid Shop


DIYcontroller
Our DIYcontroller board is available as an OEM product designed for do-it-yourselfers looking to create their own control surfaces. The DIYcontroller board provides a USB and MIDI interface to create controllers for music, VJing, installations, or performance. With the DIYController you can build you own keyboards, control surfaces, instruments, and create interactive control using sensors, triggers, faders, buttons, dials, or anything else you can imagine. The DIYcontroller is class complaint, USB powered and the firmware has Open Source software tools for custom development and configuration.


Features
• USB Powered
• Class-compliant no drivers needed
• 16 direct wire digital button contacts (support up to 64 contacts with a diode matrix, and 2048 with a diode matrix and support chips)
• 64 direct wire analog inputs
• 14 direct wire LED’s (support for additional LED's with an external power supply)
• Programmable MIDI settings with a software editor via USB
• Dimensions 3.5" x 4.5"
• OEM and quantity discounts available, email us for pricing

Coming Soon