Brain V2 / Jr. Configure v1.02

Mac | Windows

Brain Configure v1.20

Mac | Windows

For a complete list of supported software applications, please visit the controller apps page on our comminuty site.

Overlay templates These are the faceplate files for the Ohm64 and Block so you can download and print your own overlays. (eps format)
Ohm64
block

Bootloader
Most Livid Controllers have an onboard bootloader. You can use this bootloader in coordination with the Bootloader Software to upgrade the firmware for your controller over USB.
For details instructions please check our wiki.
For details on specific firmware updates, please check our Revision Log.

Bootloader Software
HID Bootloader Application - Windows

Alias 8
Alias 8 v154

Base
Base v124

BrainJr
BrainJr v207
BrainJr v206 Alias
(to use a second BrainJr on the same Computer)

Brainv2
Brainv2 v178
Brainv2 v178 Alias
(to use a second Brainv2 on the same Computer)

Code
Code v207 (Bankable) (for all Codes)
Code v207 AliasB (Bankable) (to use a second Code on the same Computer)
If your encoders operate in reverse with the 200 Series of the Code firmware, you may now flip them Globally in the Code Editor Software.
The 100 Series of the Code firmware allows individual channel output for each Control. It is provided for legacy support.
Code v105 (Multi-Channel) (for encoders with silver shafts)
Code v105 (Multi-Channel) (for encoders with black shafts)

CNTRL:R
CNTRL:R v108 (for all CNTRL:R's)
Version 100 Firmwares are provided temporarily for legacy support. Please use version 108 for all firmware updates.
CNTRL:R v100 (for encoders with silver shafts)
CNTRL:R v100 (for encoders with black shafts)

OhmRGB
OhmRGB v063
There are some OhmRGB models that have a different RGB LED module, resulting in a problem with velocity-to-color maps. You can find out if you need it by downloading this file
and dragging it onto the "Status" window in the OhmRGB_Editor.
If the LEDs turn Cyan (light blue), you need the alternate firmware:
OhmRGB v063 - alternate firmware

Ohm64
Ohm64 - Wood Edition v123
Ohm64 - (Most) Metal Edition v223
This firmware works for Metal Editions of the Ohm64 where the USB Jack is on the Left Side (when in position to use the controller).
If your USB Jack is in the Center of the Rear Panel on your Metal Edition Ohm64, you should use the Wood Edition Firmware.

Hardware
Ohm64 Manual
Block Manual
Ohm (classic) Manual

Software
Ohm64 Editor Manual
Block Editor Manual
Cell & CellDNA Manual
Union v 2.5 Manual English
VirtualV4 Manual
Batch Export Utility Manual

CellDNA can be run in both demo mode, or authorized to remove the watermark and allow for more then five minutes of full screen. Both Demo and the full version are the same installer and can be downloaded here.

Download
CellDNA Mac - version 2.51- MAC OSX
CellDNA Windows - version 2.51 - WindowsXP

The CellDNA-Control Max for Live devices provide a massive variety of remote control of CellDNA from within your Ableton Live set. View a comprehensive tutorial here and download them here:

Download
Max for Live Devices - Requires Ableton Live and Max for Live

Some simple patches and documentation that shows how you can make your Max and jitter patches functional in DNA. More info in Pete's blog post.

Download
CellDNA Dev Kit for Max/MSP

Cell 2.51 can be run in both demo mode, or authorized to remove the watermark and allow for more then five minutes of full screen. Both Demo and the full version are the same installer and can be downloaded here.

Download
Cell - version 2.51 - MAC OSX
Cell - version 2.51 - Windows

Union 2.5 can be run in both demo mode, or authorized to remove the watermark and allow for more then five minutes of full screen. Both Demo and the Full Version are the same installer and can be downloaded here.

Download
Union - version 2.5.7 - MAC OSX
Union - version 2.5.7 - WindowsXP

Designed to emphasize simplicity and hands-on control, short loops of audio can be sliced, diced, scrambled, and transformed with built-in and VST effects. Free of charge and open source.

Download
Looper 1.2 - MAC OSX
Looper 1.2 - WindowsXP

Source Code for MAX/MSP Looper Source Code

The Livid Batch Export Utility is a simple freeware program for recompressing and resizing a folder of quicktime media to a different format.

Download
Batch Export Utility 1.23 - MAC OSX
Batch Export Utility 1.23 - WindowsXP

MIDI remapping application for the Ohm Classic

Download
Ohm Connect - v 0.8a MAC OSX 10.4+
Ohm Connect - v 0.8a WindowsXP

USB MIDI Drivers for the Ohm controller.

Download
Ohm USB MIDI Driver - v1.3 MAC OSX 10.4+ Intel
Ohm USB MIDI Driver - v1.3 MAC OSX 10.4+ PPC
Ohm USB MIDI Driver - v1.4 MAC OSX 10.6+
Ohm USB MIDI Driver - v2.0 WindowsXP

Remote and synchronous control of up to 8 Edirol V-4 Mixers

Download Macintosh OctaV4 for Mac
Download Windows OctaV4 for Windows

Test your controller with MIDI send and receive utilities

Download Macintosh MIDItools for Mac
Download Windows MIDItools for Windows

To use the elements you will need the latest version of Union or Union Demo. All downloads above will include the following elements:

Download
SDK (software development kit) for creating your own elements using Cycling 74's MAX

CNTRL:R
CNTRL:R Front

OhmRGB
OhmRGB Front

Block
Block Front

Code
Code Front

Livid Logos
Livid Logo

Software Logos
CellDNA
Cell

Faceplate Outlines for all controllers
Illustrator and PNG format